Spectrum analyzer

GoldWave general discussions and community help
Post Reply
Blandine Catastrophe
Posts: 253
Joined: Sun Jul 24, 2005 3:25 pm

Spectrum analyzer

Post by Blandine Catastrophe »

I stated that the spectrum analyzer has wrong frequencies values in logarythmic mode:
Image
The signal has been cut at 15800 Hz exactly. It is what is displayed in the linear scale, but not in the logarythmic one.
Gloup? :-°
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Spectrum analyzer

Post by GoldWave Inc. »

That looks like a glitch. I'll check into that before the next update.

Chris
Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel »

The left spectrum works fine, but the right channel looks like not to have been changed... Anyways, they don't show the same graphic with two exactly identical channels when set on logarithymc
:D
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Post by GoldWave Inc. »

That does seem to be another problem. If you set the properties for both visuals to the same fixed range, that should correct it for now.

Chris
Post Reply