Vertical Scale
Vertical Scale
Curious to know what units shown in the 'vertical' scale. Its obviously not db's. Also, the '1.0 position does not seem to correspond to a 0 db input signal.
-
- Site Admin
- Posts: 4372
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact:
Re: Vertical Scale
The vertical scale is the amplitude in normalized units. A +/-1.0 value should correspond to a 0 db level provided the volume fader in the Control window is set to 100%. The actual speaker output level depends on the current volume level of the sound card.
Chris
Chris