Frequency analyzer over 22khz

GoldWave general discussions and community help
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Frequency analyzer over 22khz

Post by GoldWave Inc. »

When using a 192kHz sampling rate, you have to increase the FFT size to increase the resolution of the Spectrum Filter. With a size of 11 you have 1024 frequencies spread across 96000 Hz, which gives the 93 Hz cutoff you mentioned.

If you are interested in frequencies below 93Hz, then either a lower sampling rate must be used or the FFT size must be increased. There is no way around the mathematics. Generally echo isn't a problem with the Spectrum Filter (there is no temporal modification).
Post Reply