Analog VU Meter does not show needle(s)

GoldWave general discussions and community help
Post Reply
Darkside_1
Posts: 5
Joined: Thu Jul 21, 2016 4:41 pm

Analog VU Meter does not show needle(s)

Post by Darkside_1 »

Hi,

I noticed on the upgrades that the analog VU meter doesn't show the needle or peak needle when using it for visualization.

Also, the Properties option for the Analog VU meter doesn't work (grayed out) so I could not toggle any options (if any).

I've used the analog VU meter in the past and I find it gives me a better indication on levels/peaks than how the regular VU meters do.

Could that please be looked at?

Forgot to mention, this is on a Windows 7 64 bit system.
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Analog VU Meter does not show needle(s)

Post by GoldWave Inc. »

The needles seem to be working normally on my systems. Make sure you have the latest video driver for your system. There are no properties for the Analog Meter visual.
Post Reply