GoldWave Inc.

hi
i have a question about sample rate

do the sample rates avaible in goldwave dipend by the audio card internal or external ?

or goldwave can handle and work with sample rate 96000 even the audio card can not handle it?

thanks

hi
weid
i used a sample rate non supported by the audio card but the audio works

You're never going to get a higher effective sample rate than what the audio card/chip/interface can handle. In your case, Goldwave has simply made up the difference by adding a bunch of zeroes to your file.

Tristan wrote:You're never going to get a higher effective sample rate than what the audio card/chip/interface can handle. In your case, Goldwave has simply made up the difference by adding a bunch of zeroes to your file.

hi
i know
but i would like if the sample rate is not supported by the audio card , what will use goldwave?
the windows settings?
thanks

I guess I don't understand your question. Sorry.

Tristan wrote:I guess I don't understand your question. Sorry.

hi
maybe the developer could answer better

1) i load an audio file flac @44.100
2) effect ->resample -> 352800
3) i play the audio , i can listen and hear the audio

now when i play audio ,what sample rate does it use goldwave to play the audio (resampled @352800) ??
thanks

Unless you're using ASIO or a WASAPI exclusive mode Windows resamples the audio to a default rate you set in device properties for your sound card. Goldwave defaults to WASAPI Shared mode.

The sound card will only support a maximum sample rate and no more. Without resampling, playback will fail if the device doesnt really support that rate.

DewDude420 wrote:Unless you're using ASIO or a WASAPI exclusive mode Windows resamples the audio to a default rate you set in device properties for your sound card. Goldwave defaults to WASAPI Shared mode.

The sound card will only support a maximum sample rate and no more. Without resampling, playback will fail if the device doesnt really support that rate.

hi

Unless you're using ASIO or a WASAPI exclusive mode Windows resamples

can I ask you how can use on my laptop wasapi escluive mode?
i run w10 pro ,on another pc i have w7 both 64bit
thanks

Go in to device properties in Goldwave. Make sure its set to WASAPI/Core Audio (it may be pulseaudio...Im at work and on my phone). Under the quality drop down..pick something besides Shared mode.

DirectSound is always shared mode since its emulated in Win 7 and 10.

DewDude420 wrote:Go in to device properties in Goldwave. Make sure its set to WASAPI/Core Audio (it may be pulseaudio...Im at work and on my phone). Under the quality drop down..pick something besides Shared mode.

DirectSound is always shared mode since its emulated in Win 7 and 10.

hi
there are only these options , at least i can find only them
where is it?
thanks

You'll have to wait until I get home for a screenshot. Somewhere on the list is a dropdown box that probablt days "shared" next to quality. There are additional options like 24-bit there.

You're in luck. I found one on the internet and circled the aetting you need to change.

https://i.imgur.com/tVxmeiZ.png

DewDude420 wrote:You're in luck. I found one on the internet and circled the aetting you need to change.

https://i.imgur.com/tVxmeiZ.png

hi DewDude420
i should select pcm 24bit or ieee24
thank you so much

Sara wrote:

DewDude420 wrote:You're in luck. I found one on the internet and circled the aetting you need to change.

https://i.imgur.com/tVxmeiZ.png

hi DewDude420
i should select pcm 24bit or ieee24
thank you so much

Whichever one works.

DewDude420 wrote:

Sara wrote:

DewDude420 wrote:You're in luck. I found one on the internet and circled the aetting you need to change.

https://i.imgur.com/tVxmeiZ.png

hi DewDude420
i should select pcm 24bit or ieee24
thank you so much

Whichever one works.

thanks !
i really appreciate you help