Page 1 of 1

Speed Change, Something So Frustrating

Posted: Thu Dec 14, 2017 7:17 pm
by JackA
Have two mixed of an old 60s tune, mono only. I thought why not sync the two. Opened Audacity for a simple speed change of one track, make one faster or
one slower, I don't care, minor difference. But it ignored what I wanted. Then I open GW with it's Time Warp. Hoping to plug in a percentage value like 1.05
or .95, but its options pick a number between 25 and 400! Then you can specify total length, but that got me frustrated too. Maybe I'm the dumbest person who walked Earth or what I'm attempting to do is very difficult. I mean, the control window has a speed conrtrol where I can enter 1.02 percent, but I can't enter that Value anywhere else. I can post a two track mp3 later. Using v5.70. Thank you!

Re: Speed Change, Something So Frustrating

Posted: Thu Dec 14, 2017 8:00 pm
by JackA
... Or is that 25 to 400 value in Time Warp actually 25 to 400 where 100 means no change? So if I wanted a 2 % change in speed, I'd enter 102? From what I hear, unsynced, this should work nicely!

Re: Speed Change, Something So Frustrating

Posted: Sat Dec 16, 2017 2:20 pm
by DewDude420
Therr is a drastically good chance they will never sync. You may find after speed adjustment that the sync will drift. This is due to clock differences in the device that digitized the recording.

Re: Speed Change, Something So Frustrating

Posted: Tue Dec 19, 2017 8:53 am
by JackA
I jumped the gun, Dew. Such subtle differences between the two versions, not enough to make interesting stereo.
Worth a try :)

Thank.
Jack

Re: Speed Change, Something So Frustrating

Posted: Fri Jan 05, 2018 10:53 am
by GoldWave Inc.
You'd just multiple by 100 to get the percent. So 0.95 = 95% and 1.05 = 105%.