only left chanell ,golwave vu meter doesn't work ,is a bug?

GoldWave general discussions and community help
Post Reply
Sara
Posts: 71
Joined: Tue May 16, 2017 6:40 am

only left chanell ,golwave vu meter doesn't work ,is a bug?

Post by Sara » Wed Jan 31, 2018 1:55 pm

Hi

i have noticed that i disable the left channel Edit ->channel -> the gold Vu Meter stops to work (green and red arrow)

is a bug?

goldwave 6.31 windows 7 and 10

in both screenshot goldwave was playing a song in flac , but i have tested with other audio files

thanks
first screenshot
https://i.imgur.com/ICGQsMy.png
second screenshot
https://i.imgur.com/V7S4T8L.png
Goldwave lover

DougDbug
Posts: 2032
Joined: Wed Feb 16, 2005 3:33 pm
Location: Silicon Valley

Re: only left chanell ,golwave vu meter doesn't work ,is a b

Post by DougDbug » Wed Jan 31, 2018 3:23 pm

The bottom window with the meter is the right channel. The top window showing the spectrum is the left channel. If you right-click the spectrum-window above the meter you can change it to Analog Meter too.

Sara
Posts: 71
Joined: Tue May 16, 2017 6:40 am

Re: only left chanell ,golwave vu meter doesn't work ,is a b

Post by Sara » Wed Jan 31, 2018 3:28 pm

DougDbug wrote:The bottom window with the meter is the right channel. The top window showing the spectrum is the left channel. If you right-click the spectrum-window above the meter you can change it to Analog Meter too.
hi
but it's weird , let's say i want to have a spectrum of whe whole entire audio loaded
i have to select on both specrtum ,right?

but can i have 1 with red & left ?
i can't have phase analisys to see how the sound goes to left or right or is more in the midle right?

thank you so much
Goldwave lover

DougDbug
Posts: 2032
Joined: Wed Feb 16, 2005 3:33 pm
Location: Silicon Valley

Re: only left chanell ,golwave vu meter doesn't work ,is a b

Post by DougDbug » Wed Jan 31, 2018 7:46 pm

I think the X-Y graph gives you the (relative) phase information, but as far as I know all of the other display modes are independent for left & right.

(I'm on a 32-bit computer right now so I'm running an older version of GoldWave.)

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: only left chanell ,golwave vu meter doesn't work ,is a b

Post by GoldWave Inc. » Fri Feb 23, 2018 9:18 am

DougDbug is correct. Each visual corresponds to a specific channel (except in certain cases where both channels are required such as the X-Y Graph). There is currently no way to change a visual's channel.

Post Reply