hi
there is a bug
if i select a very short part of audio , doesn't matter audio format , in my case flac , and use amplitude stats , this cause the program crashed
test on w10 64bit , last update and 1809
could be tested and fixed , thanks
merry xmas
bug amplitude stats crashed the program when i select a tiny portion of audio
Re: bug amplitude stats crashed the program when i select a tiny portion of audio
Just tried it here and it seems that anything less than 0.4 second goes wrong. I wonder if it is because there is not enough information for the tool to work on? Anyway enjoy the Xmas break and do not over-indulge
Re: bug amplitude stats crashed the program when i select a tiny portion of audio
hi
maybe we will get an update for Xmas
thanks to you too ♫♫♫
Goldwave Lover ♥ ♫
Re: bug amplitude stats crashed the program when i select a tiny portion of audio
Chris (GoldWave's developer) is the only one who can answer this, but "loudness" is related to the duration of the sound so it does take some time to get a meaningful result.
I did some quick research about LUFS and I dug up this:
I did some quick research about LUFS and I dug up this:
I agree that GoldWave could give a more elegant error/warning message.- gating of 400 ms blocks (overlapping by 75%), where two thresholds are used:
– the first at −70 LKFS;
– the second at −10 dB relative to the level measured after application of the first threshold.
Re: bug amplitude stats crashed the program when i select a tiny portion of audio
hi and @GoldWave Inc. @adminDougDbug wrote: ↑Mon Dec 23, 2019 4:24 pmChris (GoldWave's developer) is the only one who can answer this, but "loudness" is related to the duration of the sound so it does take some time to get a meaningful result.
I did some quick research about LUFS and I dug up this:I agree that GoldWave could give a more elegant error/warning message.- gating of 400 ms blocks (overlapping by 75%), where two thresholds are used:
– the first at −70 LKFS;
– the second at −10 dB relative to the level measured after application of the first threshold.
yes , but if i want to check and misure less than 0.4 second , would be great having goldwave crashing
thanks
Goldwave Lover ♥ ♫
-
- Site Admin
- Posts: 4375
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact:
Re: bug amplitude stats crashed the program when i select a tiny portion of audio
Thanks for reporting the problem. That will be fixed in the next update. However GoldWave will simply display a message that the selection is too short. As DougDbug mentioned, using Amplitude Statistics on a very short selection is not possible. You'll need to use the "Match" effect instead, which uses a simpler algorithm.