Hi,
When I put an absolute time which is lower then the current time I got Range error,
If I put higher value it's ok.
Why?
Bug: Move Function
-
- Site Admin
- Posts: 4372
- Joined: Wed Mar 10, 2004 6:43 pm
- Location: St. John's, NL
- Contact:
Re: Bug: Move Function
I'm not sure of the context you are talking about, but if you are trying to move a value point to a different time, then you can only move it between to two adjacent points. So if you had a point at 5 seconds, another at 10, and another at 15, you can move the point at 10 between 5 and 15. Check to make sure there are not multiple points at the same time. That would restrict the range.