Testing 'Meld to Project' for a clip from large project

VideoMeld discussions and community help
Post Reply
Vidman
Posts: 3
Joined: Wed Oct 24, 2018 7:18 am

Testing 'Meld to Project' for a clip from large project

Post by Vidman » Sun Feb 03, 2019 6:36 pm

Sorry, for the title being a bit vague.....

Okay, so I have a project that's a couple of hours long.
I want to make sure certain parts of it are synched correctly, so just need to pick a start point and an end point that are just a couple of minutes apart from each other.

Question is simply: How?

I can do start of project to a point, somewhere after start to end, but not two points that are neither start nor end.

GoldWave Inc.
Site Admin
Posts: 3905
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Testing 'Meld to Project' for a clip from large project

Post by GoldWave Inc. » Mon Feb 04, 2019 3:59 pm

If the project contains many smaller section, then you can just select the sections you want to meld and choose the "Selected sections" setting when melding. Otherwise there isn't a quick way and you'd need to split the larger sections.

Vidman
Posts: 3
Joined: Wed Oct 24, 2018 7:18 am

Re: Testing 'Meld to Project' for a clip from large project

Post by Vidman » Tue Feb 05, 2019 1:55 pm

That sounds good. Thanks.

I could split a section, select that section to meld it, then click "Undo" to unsplit it. Yes?

Post Reply