24 bit and punch in

General discussions and questions about MULTIQUENCE
Post Reply
musicstuff
Posts: 17
Joined: Tue Dec 28, 2004 3:24 am
Location: winlaw bc canada

24 bit and punch in

Post by musicstuff »

I was wondering if 24 bit is in the future for MultiQ, and on the fly punchin repairs.
Thanks!
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: 24 bit and punch in

Post by GoldWave Inc. »

24 bit support and multichannel support are planned for Multiquence. Punch-in is possible (sort of) if you are using recording sections. You'd move the edit marker to the place you want to re-record within the recording section and play the project to start recording (the recording section must be in record mode).

Chris
blindahl
Posts: 1
Joined: Sun Sep 10, 2006 2:37 am

Post by blindahl »

any idea what the time frame might be for 24-bit? i'm in the process of learning multiquence, with the eventual goal of doing some multi-track recordings of my band. i'll be upgrading to a 24-bit 196khz sound card in the relatively near future, and i'd like to be able to use it to it's full potential.

not looking for specifics... but are we talking weeks? months? years? :)
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Post by GoldWave Inc. »

Definitely many months.

Chris
gravy6
Posts: 31
Joined: Wed Nov 18, 2009 11:37 am

Punch in

Post by gravy6 »

GoldWave Inc. wrote:24 bit support and multichannel support are planned for Multiquence. Punch-in is possible (sort of) if you are using recording sections. You'd move the edit marker to the place you want to re-record within the recording section and play the project to start recording (the recording section must be in record mode).

Chris

Chris, Can you give more instructions on how to PUNCH IN. I'm recording long voice only narrations and would like to punch in instead of going back and editing.
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: 24 bit and punch in

Post by GoldWave Inc. »

It would be easier to use GoldWave for recording. Although you can do it in Multiquence, it involves setting the recording sections to playback mode to find the punch-in point to move the marker, then back again to recording mode to record. If you don't get it right every time, you could end up erasing the recording and there's no way to undo after.

Chris
Post Reply