multi tracking with usb card

General discussions and questions about MULTIQUENCE
Post Reply
musicstuff
Posts: 17
Joined: Tue Dec 28, 2004 3:24 am
Location: winlaw bc canada

multi tracking with usb card

Post by musicstuff » Mon Nov 26, 2007 12:33 am

I am trying to do some multitracking with a (USB external creative sound blaster ) I record a trak in gold wave then bump it to muliquence and set up a recording track and do my play back and record but when I play back the mix the timeing gos wacky after a mi or so.
Is this a latancy problem?
I have done tons of recording this way with the intower card and it's fine,
I just have a buz sound problem with the monitor play back volume.
Thanks

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: multi tracking with usb card

Post by GoldWave Inc. » Fri Nov 30, 2007 11:19 pm

It is mostly likely a problem with the sound driver. See if there are any special drivers that need to be installed for the device. Also make sure you have the latest drivers from the manufacturer.

Also try mixing just within GoldWave as explained here.

Chris

ck010898
Posts: 19
Joined: Tue Feb 28, 2006 2:17 pm

Post by ck010898 » Tue Dec 04, 2007 10:16 am

I had a miserable time trying to track with a USB audio interface.

overwhelming problems with latency, buzz... you name it.

When I switched to the PCI-based M-Audio Delta 1010LT, all my problems went away. I was then able to record 4 tracks simultaneously, in-synch, zero latency. Assuming you already have Multiquence, you can get this up and running for $200 or less. And you can get two of these cards and capture 8 tracks simultaneously, too!

And now I cant even unload my old USB interfaces for half of what I paid for them 6 months ago.

musicstuff
Posts: 17
Joined: Tue Dec 28, 2004 3:24 am
Location: winlaw bc canada

Post by musicstuff » Wed Dec 05, 2007 1:07 am

Thank's much for your help..all
I found a sound card in an old computer that is silent with the play back and monitor volumes up.
so that more or less fix my problem anyhow.
cheers O

Post Reply