Cutting off the end

General discussions and questions about MULTIQUENCE
Post Reply
johnpwiles
Posts: 5
Joined: Thu Feb 10, 2005 4:43 pm

Cutting off the end

Post by johnpwiles » Mon May 23, 2005 11:17 am

I created wavs in Goldwave and am attempting to use Mulitquence to do fade ins. the file is 15 mins and without watching at the whole 15 mins, it starts fine but than at the end the visual is off with the playback, AND IT IS TRUNCATING MY AUDIO. What is the problem. I did get an error message but did not write it down and have since uninstalled and reinstalled the program. What to do?

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: Cutting off the end

Post by GoldWave Inc. » Mon May 23, 2005 5:15 pm

Be sure to use uncompressed Wave 16 bit files in Multiquence (not MP3 files and not compressed Wave files). Variable bitrate MP3 files should not be used at all. Also make sure you have the latest sound driver installed for your sound card.

Chris

Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel » Sun Jan 14, 2007 2:55 pm

I stated that the first second of my audio files (standard 16bit 44100hz wave) is muted on the saved video files (wmv).

Otherwise, I had to convert this file in AVI to get the end. Using directly the gif, the end of the file is missing on the video file, and you don't see the rabbit and it's carot car on the video. Has this file something wrong in it's format? (Made with jasc animation shop 3.11). http://img235.imageshack.us/img235/5997 ... 915pc2.gif
:D

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Post by GoldWave Inc. » Tue Jan 16, 2007 8:32 pm

Actually I'm surprised that animiated GIF files even open in Multiquence. It is not one of the supported formats for video.

Chris

Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel » Wed Jan 17, 2007 5:46 pm

Most of animated gifs open, like on the start and the end of this trial video. http://www.dailymotion.com/video/xzlwt_lapin-collection
EDIT: It is however useful to open animated gifs because it allows to insert one's own little simple animations.

And is there a solution to get audio from start from file?
:D

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Post by GoldWave Inc. » Mon Jan 22, 2007 8:05 pm

I don't know of any reason why the audio at the beginning would be missing. I haven't noticed any problem during testing. What audio format are you selecting?

Chris

Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel » Tue Jan 23, 2007 3:02 pm

Input PCM signed 16 Bit Stereo 44100 Hz

Output : in wmv, 32 kbps stereo 44100 Hz
:D

GoldWave Inc.
Site Admin
Posts: 3897
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Post by GoldWave Inc. » Thu Jan 25, 2007 4:18 pm

I tested with WMA 9.2, 32kbps, 44100Hz, stereo, CBR settings. All the audio in the WMV file played normally in WMP. Check to make sure the playback rate is set to 44100Hz under Options | Playback.

Chris

Kummel
Posts: 141
Joined: Sat Sep 23, 2006 7:10 pm

Post by Kummel » Sat Jan 27, 2007 8:50 pm

After have uploaded a video, it appears that the sound is cut off at the beginning in windows media player, in vlc, and in the multiquence preview.
If I watch the uploaded video, the sound is intact. :scratch-scratch:
:D

Post Reply