hi,
i often need to work work on a cue part (a track among an entire album).
the operation to select a track is very full of "clicks" : 4 clicks.
i see the select beeween clue but the first one (first cue) is hard to catch because of the screen border.
is there a double click somewhere (under the graph by example ) to select the track differently than marking stard/end?
or a shortcut keyboard like "a key + a number".
there is nothing clickable upper the graph, so maybe you could add little mark to select track by 1 single click...
have a good day
is there a way to select a cue part by keyboard or 1click ?
-
- Posts: 167
- Joined: Sun Nov 28, 2010 6:07 am
- Location: Amiens
- Contact:
-
- Posts: 1171
- Joined: Fri Mar 11, 2005 11:15 pm
- Location: Washington DC Metro Area
- Contact:
Re: is there a way to select a cue part by keyboard or 1clic
You can right-click in the window and select "set start" and "set finish" markers; but that's still technically 4 clicks and you probably knew that.
The way I would do it is have Goldwave split the thing in to individual tracks using the CUE file and then recombine them later using another utility.
The way I would do it is have Goldwave split the thing in to individual tracks using the CUE file and then recombine them later using another utility.
-
- Posts: 167
- Joined: Sun Nov 28, 2010 6:07 am
- Location: Amiens
- Contact:
Re: is there a way to select a cue part by keyboard or 1clic
in fact my curiosity pushed me to right-click in the zone between the 2 triangles cue, and there is a option to "select between the cues",
so now, i have only 2 clicks which is pretty good !
so now, i have only 2 clicks which is pretty good !
-
- Posts: 1171
- Joined: Fri Mar 11, 2005 11:15 pm
- Location: Washington DC Metro Area
- Contact:
Re: is there a way to select a cue part by keyboard or 1clic
Hahahaha! There ya go.
That sounds like much how I learned Goldwave 20 years ago. Just click things and see what happens.
Of course I was also learning the finer points of editing at the same time by just doing stuff and see what happened.
That sounds like much how I learned Goldwave 20 years ago. Just click things and see what happens.
Of course I was also learning the finer points of editing at the same time by just doing stuff and see what happened.
-
- Posts: 167
- Joined: Sun Nov 28, 2010 6:07 am
- Location: Amiens
- Contact:
Re: is there a way to select a cue part by keyboard or 1clic
i stil lthink a single click on a little icone above the graph would be the better solution (and visible too).
just under the tool bar and above the graph, there is a unexploited area to place icone or clickable controls between cues points.
Even, the cue names or numbers of track could be written there....
just an idea...
just under the tool bar and above the graph, there is a unexploited area to place icone or clickable controls between cues points.
Even, the cue names or numbers of track could be written there....
just an idea...