Convert Multi-Channel to Single Channel

GoldWave general discussions and community help

Convert Multi-Channel to Single Channel

Postby jangotrick » Sat Mar 09, 2019 11:46 am

Hello everyone,

New to this forum but pretty familiar with Goldwave and have got stuck on something that I am unable to resolve.

I recorded a vocal in two channels (left and right) and now only want the vocals to be saved in a left channel file. I have tried going to EDIT > CHANNEL > SELECT CHANNEL > SAVE AS but still get the multi-channel voice.

I have also tried going to STEREO settings and converting the file to Mono Left and saving it as a new file, but still hear both channels.

I have also tried creating a new Mono File, copying the original file after deselecting one channel and selecting Overwrite, but same problem.

Not sure what is happening but any help will be appreciated.

Jango
jangotrick
 
Posts: 2
Joined: Sat Mar 09, 2019 11:42 am

Re: Convert Multi-Channel to Single Channel

Postby DougDbug » Sat Mar 09, 2019 1:36 pm

There's more than one way to do it, but this will work -

Edit -> Channel and un-check left.
Hit the Del key (or Edit -> Delete, etc.) to delete the unwanted right channel.

Edit -> Channel, check left and uncheck right
Edit -> Copy (or click the Copy tool, etc.)
Edit -> Channel, check right an uncheck left
Edit -> Paste. (Now you have the wanted originally-left vocals in both channels.)

You can now save-as mono or stereo.

...Or, you can you just leave one side silent before making a mono file but you'll get half-volume and you might want to re-open the file and Maximize volume.
DougDbug
 
Posts: 2017
Joined: Wed Feb 16, 2005 3:03 pm
Location: Silicon Valley

Re: Convert Multi-Channel to Single Channel

Postby jangotrick » Sat Mar 09, 2019 2:01 pm

DougDbug wrote:There's more than one way to do it, but this will work -

Edit -> Channel and un-check left.
Hit the Del key (or Edit -> Delete, etc.) to delete the unwanted right channel.

Edit -> Channel, check left and uncheck right
Edit -> Copy (or click the Copy tool, etc.)
Edit -> Channel, check right an uncheck left
Edit -> Paste. (Now you have the wanted originally-left vocals in both channels.)

You can now save-as mono or stereo.

...Or, you can you just leave one side silent before making a mono file but you'll get half-volume and you might want to re-open the file and Maximize volume.


Thanks very much. The delete process worked.

Many thanks for your quick help and much appreciated. Have a good weekend.

Jango
jangotrick
 
Posts: 2
Joined: Sat Mar 09, 2019 11:42 am


Return to GoldWave General

Who is online

Users browsing this forum: No registered users and 8 guests

Google Ads

Keywords: sound editor, song editor, audio editor, sound converter, sound recorder, itunes, mp3, cassette, tape recording software, vinyl, LP, restoration, noise reduction, clean, filter, visual, speech