Search found 18 matches

by rbendtzen
Sat Aug 01, 2020 7:34 pm
Forum: GoldWave General
Topic: Converting .mkv files to .mp3 files
Replies: 2
Views: 470

Re: Converting unsupported GoldWave files to .mp3 files

Hi. Thanks for the suggestions for TAudioConverter or Audacity. I tried TAudioConverter and it works great. I'm amazed at the speed the files are converted. It's mostly less than ten minutes or just about ten minutes. I tried to use TAudioConverter to convert a .ram file to an MP3 file. But I couldn...
by rbendtzen
Mon Jul 27, 2020 7:18 pm
Forum: GoldWave General
Topic: Converting .mkv files to .mp3 files
Replies: 2
Views: 470

Converting .mkv files to .mp3 files

Hi. Is it possible to convert .mkv Matroska video files to .mp3 audio files directly using GoldWave? I tried converting a bunch of .mkv files to .mp3 files using the Batch Processing feature and the files came out all staticky instead of having actual audio on them. Is there a way for GoldWave to co...
by rbendtzen
Sat Jul 11, 2020 2:50 pm
Forum: GoldWave General
Topic: Batch Processing a folder containing audio files, sub folders and non audio files
Replies: 2
Views: 676

Batch Processing a folder containing audio files, sub folders and non audio files

Hi. If I were to batch process a folder containing mostly audio files, but also containing subfolders and non audio files, such as text files, If I were to do a select all command for all the files in a folder to be converted to a specific audio format, will GoldWave just convert the audio files and...
by rbendtzen
Wed May 27, 2020 9:34 pm
Forum: GoldWave General
Topic: How to get a file back to its original frequency.
Replies: 1
Views: 774

How to get a file back to its original frequency.

Hi. Back in the early 2010s, I was using GoldWave to brighten up certain files that had audio where the sound was not as bright as it could have been. For example, sometimes it was hard to tell if certain letters were S or F. So, I started using the Inverse Riaa Eq Curve feature in the Equalizer set...
by rbendtzen
Fri Mar 01, 2019 1:36 pm
Forum: GoldWave General
Topic: Removing unwanted sound from a file ripped from a cassette t
Replies: 4
Views: 1852

Re: Removing unwanted sound from a file ripped from a casset

Hi.

I forgot to tell you that I have already tried using the Pop/Clicks feature to remove the popping sound heard in the file from the audio cassette. Unfortunately, the sound did not go away. Do you have any further solutions?

Please let me know. Thank you very much.

Rob Bendtzen
by rbendtzen
Fri Mar 01, 2019 12:46 pm
Forum: GoldWave General
Topic: Removing unwanted sound from a file ripped from a cassette t
Replies: 4
Views: 1852

Removing unwanted sound from a file ripped from a cassette t

Hi. I have a file that I ripped from an audio cassette tape. The file has some unwanted sound in it. It's a kind of popping sound heard throughout the recording that some audio cassette tapes have. It's sort of a steady, rhythmic pop, pop, pop heard all throughout this particular file. Would it help...
by rbendtzen
Thu Jul 05, 2018 2:17 am
Forum: GoldWave General
Topic: Creating one left channel file and one right channel file as
Replies: 7
Views: 3073

Re: Creating one left channel file and one right channel fil

Hi. Actually, I should have told you this when I first posted the topic, but I am totally blind and use a screen reader to help me on my computer. I use it with gold wave. I only use the keyboard, not the mouse. I use key strokes, such as Alt+F for the File menu and Alt+E for the Edit menu and sofor...
by rbendtzen
Wed Jul 04, 2018 11:15 pm
Forum: GoldWave General
Topic: Creating one left channel file and one right channel file as
Replies: 7
Views: 3073

Re: Creating one left channel file and one right channel fil

Hi. I would like a little more detail, please. The original files are mono, but they are from a stereo recording. For example, one file contains content from the left channel, and the other file contains content from the right channel. But they are both mono sound files. Could you please explain how...
by rbendtzen
Wed Jul 04, 2018 5:49 pm
Forum: GoldWave General
Topic: Creating one left channel file and one right channel file as
Replies: 7
Views: 3073

Creating one left channel file and one right channel file as

Hi. Is there a way for me to take 2 separate audio files, one containing content on the left channel of a stereo file and another containing content on the right channel of a stereo file and make those files as one stereo file with the left channel on the left side and the right channel on the right...
by rbendtzen
Mon May 21, 2018 4:23 pm
Forum: GoldWave General
Topic: Removing or Reducing Hum or static from files
Replies: 2
Views: 2330

Removing or Reducing Hum or static from files

Hi. Is it possible for me to completely remove or reduce to any extent the sounds of constant humming and/or static from audio files? The kind of hum I am talking about refers to files that have a high or low pitch tone heard underneath the main audio of the file. Also, can I remove or reduce static...
by rbendtzen
Sun Aug 02, 2015 6:38 pm
Forum: GoldWave General
Topic: Making several files as one
Replies: 2
Views: 1635

Re: Making several files as one

Hi. I found a way to do it. What I did was: Press AltT to go to the Tools Menu. Then I pressed M for Merge Files and was presented with a window in which one of the buttons was Add Files. I tried adding several files to one file and it combined them all as one. Thanks for suggesting help. Rob Bendtzen
by rbendtzen
Mon Jul 27, 2015 12:35 am
Forum: GoldWave General
Topic: Making several files as one
Replies: 2
Views: 1635

Making several files as one

Hi.

I am trying to make several files as one. Is there a way to do that with GoldWave? If so, could you please outline the steps?

Please note that I am blind and use the keyboard, not the mouse. So, please outline the steps for this task when using the keyboard. Thank you very much.

Rob Bendtzen
by rbendtzen
Wed May 06, 2015 9:08 am
Forum: GoldWave General
Topic: Using an alternate sound card to pla sound from GoldWave
Replies: 4
Views: 1935

Using an alternate sound card to pla sound from GoldWave

Hi. I am getting a new computer that, (in edition to having the preinstalled onboard sound card, it will also have an external sound card as well. Would it be possible for me to playback sound from GoldWave from that external sound card instead of the on board one? If so, how can I make this work? P...
by rbendtzen
Fri Feb 13, 2015 10:55 pm
Forum: GoldWave General
Topic: Changing the speed but not the pitch of an audio file
Replies: 1
Views: 1411

Changing the speed but not the pitch of an audio file

Hi. Is there a way to change the speed (but not the pitch) of an audio file using GoldWave? If so, could you please tell me the steps involved? Please note that I tried using the Faster option in the Doppler effect and it changed the pitch as well as the speed. Also, Please note that I am blind and ...
by rbendtzen
Mon Oct 06, 2014 5:05 pm
Forum: GoldWave General
Topic: Recording sound from GoldWave to GoldWave
Replies: 2
Views: 2073

Recording sound from GoldWave to GoldWave

Hi.

I am wondering if there is a way to record sound from a file coming out of Goldwave, with GoldWave? If so, how is this done?

Please note that I am totally blind and use a screen reader and use the keyboard, not the mouse.

Please let me know. Thank you very much.

Rob Bendtzen