Search found 4377 matches

by GoldWave Inc.
Wed Oct 06, 2004 6:02 pm
Forum: GoldWave General
Topic: Sound within sound
Replies: 2
Views: 4254

Re: Sound within sound

There is no way to automatically mix in a sound every 5 seconds, but you could do it manually by copying (Edit | Copy) the sound and mixing it (Edit | Mix) with the MP3 file, then moving the start marker ahead by 5 seconds (Edit | Marker | Set) and copying/mixing again.

Chris
by GoldWave Inc.
Wed Oct 06, 2004 5:50 pm
Forum: GoldWave General
Topic: distortion recording streaming audio
Replies: 1
Views: 3902

Re: distortion recording streaming audio

Make sure that GoldWave is not using the emulated Total Recorder device. Press the F11 key, choose the Device tab, then select the sound card device directly for both playback and recording rather than the Primary one. Also try checking the "High latency..." checkbox.

Chris
by GoldWave Inc.
Wed Oct 06, 2004 5:43 pm
Forum: GoldWave General
Topic: Voice over help
Replies: 2
Views: 4442

Re: Voice over help

Using the Volume effects to manually lower the music's volume is to only way to do it right now. A new voice over plug-in is being developed that will automatically fade in and out the music and mix the voice. However it will be at least a couple of months before it will be available.

Chris
by GoldWave Inc.
Wed Oct 06, 2004 5:29 pm
Forum: GoldWave General
Topic: New libogg v1.1.2 is out!
Replies: 1
Views: 3490

Re: New libogg v1.1.2 is out!

Thanks for the note. The new Ogg Vorbis code will be used in the next GoldWave update.

Chris
by GoldWave Inc.
Wed Oct 06, 2004 5:25 pm
Forum: GoldWave General
Topic: Loop point editing
Replies: 12
Views: 15719

Re: Loop point editing

There are no plans to support looping. Full support (load and save, seemless point detection, different looping modes, multiple loops, etc.) would add a lot of complexity to GoldWave. There are a number of other programs specially designed for that type of work.


Chris
by GoldWave Inc.
Wed Oct 06, 2004 5:00 pm
Forum: GoldWave General
Topic: Speeding up the overview graph?
Replies: 4
Views: 5730

Re: Speeding up the overview graph?

Background drawing of the waveform and overview graph is planned for a future update.

Chris
by GoldWave Inc.
Wed Oct 06, 2004 4:56 pm
Forum: GoldWave General
Topic: Start playing at end of selection and keep playing?
Replies: 7
Views: 8363

Re: Start playing at end of selection and keep playing?

For (1) GoldWave will continue to play when you move the finish marker, but you have to move the finish marker about 2 second before the playback reaches it otherwise it stops at the old position. GoldWave v5 prebuffers about 2 seconds of audio ahead of the current playback position. A prebuffer set...
by GoldWave Inc.
Sat Oct 02, 2004 12:17 am
Forum: GoldWave General
Topic: Help! Identify the sound format
Replies: 6
Views: 6941

Re: Help! Identify the sound format

When opening the file try selecting other attributes, such as 16 bit, u-Law, A-law, etc. to see if you get any clearer results.

Chris
by GoldWave Inc.
Sat Oct 02, 2004 12:15 am
Forum: GoldWave General
Topic: Goldwave effects not happening on DVD player
Replies: 2
Views: 4083

Re: Goldwave effects not happening on DVD player

Have you tried saving the maximized file under a different name to avoid any confusion with the original?

Chris
by GoldWave Inc.
Sat Oct 02, 2004 12:13 am
Forum: GoldWave General
Topic: Strange problem with playback of files edited for length
Replies: 2
Views: 4048

Re: Strange problem with playback of files edited for length

My guess is that you have two different files in different folders. The edited file is saved in one folder, but the file opened in WMP, Real, etc. is in a different folder. Or it could be a different file type (the original is an MP3 file while the edited one is a Wave file). Also be sure to close t...
by GoldWave Inc.
Sat Oct 02, 2004 12:08 am
Forum: Developers
Topic: Can I do this with the SDK.
Replies: 4
Views: 10975

Re: Can I do this with the SDK.

The Plug-in SDK does not allow you to control GoldWave. It only allows plug-ins to be created for handling new file formats or adding new effects or visuals. Unfortunately what you described would not be possible with the SDK or GoldWave (except through manual editing). Chris P.S. Someone from GoldW...
by GoldWave Inc.
Fri Oct 01, 2004 11:57 pm
Forum: GoldWave General
Topic: What's a LAME_ENC. DLL module?
Replies: 3
Views: 12240

This link explains how to install the LAME_ENC.DLL file.

Chris
by GoldWave Inc.
Fri Oct 01, 2004 11:54 pm
Forum: GoldWave General
Topic: Sine Waves
Replies: 2
Views: 4900

Re: Sine Waves

In case anyone else is wondering, to generate a short tone of 0.250 seconds, you'd use the expression "sin(2*pi*f*t)*(t<0.250)". There is no way to generate different tones in each channel within the evaluator. You'd have to use the Edit | Channel menu to select one channel at a time, then...
by GoldWave Inc.
Fri Oct 01, 2004 11:45 pm
Forum: GoldWave General
Topic: improving a recording
Replies: 1
Views: 4162

Re: improving a recording

I do not know of any way to remove the echo/reverb problem.

Using the Equalizer filter effect to raise the middle bands may bring out the voice a bit more.

Chris
by GoldWave Inc.
Fri Oct 01, 2004 11:41 pm
Forum: GoldWave General
Topic: Having Codec Problems
Replies: 8
Views: 9089

No codec error

You'll need to install the LAME MP3 encoder. See this link for details.

Chris