XP Home access violation error upon exit ...

GoldWave general discussions and community help
Post Reply
jwflorez
Posts: 5
Joined: Wed Feb 16, 2005 8:34 pm

XP Home access violation error upon exit ...

Post by jwflorez »

I get an XP Home "access violation" error upon exiting GW version 5.09 and 5.10. Not so with v5.08.

The issue is intermittent. v5.08 never unloaded its process from task manager. The new versions do, but with the above error.

Thanks in advance for any help you may offer.
John Florez
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: XP Home access violation error upon exit ...

Post by GoldWave Inc. »

Try using Start | Programs | GoldWave | GoldWave Setup and check the "Disable effect plug-ins" option to see if that helps.

Chris
jwflorez
Posts: 5
Joined: Wed Feb 16, 2005 8:34 pm

No progress ...

Post by jwflorez »

That didn't work, Chris. I experiment with all the GW Setup switches to no avail. Any further suggestions?
John Florez
GoldWave Inc.
Site Admin
Posts: 4372
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: No progress ...

Post by GoldWave Inc. »

The problem seems to be limited to your system configuration. Are you able to view the details of the error report to see if the error occurs in a certain module? What sound and video hardware does your system have?

Does the error occur only after using certain commands in GoldWave and closing the program, or does it occur by simply running and closing the program?

Chris
jwflorez
Posts: 5
Joined: Wed Feb 16, 2005 8:34 pm

Next ...

Post by jwflorez »

Thanks for the suggestions, Chris.

I'm a multimedia developer and don't have the time to problem-solve this issue. Twice a year I do a fresh install of XP, so I'm sure everything will be OK then, as usual.

For now, I'll just revert to v5.08.
John Florez
Post Reply