How to repair wav audio file with GoldWave ?

Discussions for GoldWave plug-in development
Post Reply
darius
Posts: 8
Joined: Tue Jun 29, 2010 2:38 pm

How to repair wav audio file with GoldWave ?

Post by darius » Tue Jun 29, 2010 7:11 pm

Hi,

please let me if GoldWave can repair the following audio file
and save it into 1 channel mono 16 bit, 800 Hz wav format
or one another Asterisk's MusicOnHold playable format.



Asterisk Celliax audio recorded by Audacity in .wav file format

http://www.sendspace.com/file/nk6tb6



Darius
[e-mail address deleted]

GoldWave Inc.
Site Admin
Posts: 3903
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: How to repair wav audio file with GoldWave ?

Post by GoldWave Inc. » Wed Jun 30, 2010 1:19 pm

This forum is for software development. The General forum should be used for questions like these.

Note that I've removed your e-mail address for your privacy/protection.

Chris

darius
Posts: 8
Joined: Tue Jun 29, 2010 2:38 pm

Re: How to repair wav audio file with GoldWave ?

Post by darius » Wed Jul 14, 2010 9:55 am

GoldWave Inc. wrote:This forum is for software development. The General forum should be used for questions like these.

Note that I've removed your e-mail address for your privacy/protection.

Chris
What privacy protection do you mean ?
Under standing Personal Data Protection Acts, it's up to an individual to decide on what personal protection is sought, if any.

GoldWave Inc.
Site Admin
Posts: 3903
Joined: Wed Mar 10, 2004 6:43 pm
Location: St. John's, NL
Contact:

Re: How to repair wav audio file with GoldWave ?

Post by GoldWave Inc. » Mon Jul 19, 2010 3:06 pm

Some people are not aware that e-mail addresses are harvested by spammers from web sites all the time. So posting your e-mail address may increase the volume of junk mail you receive. Just thought I'd save you some trouble, but you are correct that is up to the individual.

Chris

Post Reply